SPECIFICATIONS FOR THE CASSPIR MPV

 
       
TECHNICAL SPECIFICATIONS
 
       
 
PROTECTION LEVELS
   
  Hull

Small Arms on Window Glass 7,62 x 51 mm NATO Ball

 
  No of 7 kg Blast Type Landmine Under Center Hull: 2  
  No of 7 kg Blast Type Landmine Under Any Wheel: 2  
       
 
CREW AND PERSONNEL CAPACITY
   
  Crew 1 Driver + 1 Co-driver  
  Personnel 12  
       
 
ENGINE
   
  Type ADE 352T  
  Description Water-cooled, direct injection, 4-stroke, turbo charge, diesel  
  Number of cylinders 6 in-line  
  Displacement 5 675 cm³  
  Output 124 KW at 2 800 r/min  
  Torque 520 Nm at 1 700 r/min  
       
 
AIR FILTERING SYSTEM
   
  Type Donaldson FHG/12/0276 Double dry paper element  
       
 
TRANSMISSION SYSTEM
   
  CLUTCH    
  Type Single plate, dry disc clutch  
       
 
GEARBOX
   
  Type Manual 5 speed forward (all synchromesh) with reverse  
       
 
TRANSFER CASE
   
  Type Two speed  
  Operation Pneumatic  
       
  DRIVE AXLES (Mercedes Benz) (MB)    
  Front Single reduction, palloid drive, and steering axle  
  Rear Single reduction, hypoid drive axle with different lock  
       
 
STEERING SYSTEM
   
  STEERING BOX    
  Type Ball and nut, hydraulic power assisted  
       
 
BRAKING SYSTEM
   
  SERVICE BRAKE    
 
Type
Dual circuit, air assisted hydraulically operated drum brakes on front and rear axles  
       
 
EMERGENCY BRAKE
   
  Type Air-operated spring-loaded chamber with mechanical effect in rear axle drum  
       
 
SUSPENSION
   
  Type Semi-elliptical leaf spring front and rear.  
    Telescopic double acting oil filled shock absorbers. Front and rear. Front axle articulation limited by check straps.  
       
 
WHEELS
   
  Tyres Cross ply multi purpose 14.00 x 20 x 18 ply rating  
    Run Flat Inserts (RFI) Optional  
  Tyres pressures Paved Road: 500 KPa  
    Off-road: 310 KPA  
       
 
ELECTRICAL SYSTEM
   
  Type 28V Negative Earth  
       
 
DIMENSIONS MASS AND PERFORMANCE
   
  Wheel Base 4 200 mm  
  Wheel Track Front: 2 100 mm  
    Rear: 2 060 mm  
  Overall length 6 900 mm  
  Overall height 3 125 mm  
  Overall width 2 450 mm  
  Overhang Front: 1 234 mm  
    Rear: 1 436 mm  
  Angle of approach 46°  
  Angle of departure 40°  
  Hump radius 2 820 mm  
  Ground Clearance Front: 330 mm  
    Rear: 360 mm  
  Turning Circle 17 meters  
       
 
THEORETICAL PERFORMANCE
   
  MAXIMUM ROAD SPEED (Km/h)    
  1st gear High range         11  
    Low range           7  
  2nd gear High range         21  
    Low range         13  
  3rd gear High range         36  
    Low range         23  
  4th gear High range         60  
    Low range         39  
  5th gear High range         84  
    Low range         54  
       
 
VEHICLE MASS AND PERMISSIBLE LOADS
   
  Unladen Vehicle   9 480 Kg  
  Payload   1 400 Kg  
  Total 10 880 Kg  
  Load Distribution Front axle: 5 145 Kg  
    Rear axle:  5 735 Kg  
  Permissible Gross - Vehicle Mass (GVM) 14 000 Kg  
  Permissible Gross - Combination Mass (GCM) 22 000 Kg  
       
       
 
       
               © 2006 www.mechemdemining.com - All Rights Reserved.                                                                                          
While every care has been taken to ensure the accuracy of the information on this site, neither MECHEM nor its employees
will accept responsibility or liability for the validity of any information obtained from this site